Len 100 Wp

Len 100 Wp PV dimanfaatkan dalam berbagai aplikasi sistem pembangkit tenaga surya baik yang berdiri sendiri (Stand Alone System) ataupun Sistem Komunal. Modul ini dirancang untuk memberikan daya dengan tegangan cukup untuk mengisi baterai. Tepat digunakan dalam berbagai aplikasi seperti peralatan instrumen, sensor keamanan,navigasi lampu lalu lintas dll.

 

Certified by B2TE BPPT Based on SNI:04-3850.2-1995
Corrosion Test Report Based on SNI:04-6298-2000

100-12volt  Len 100 Wp 100 12volt

Electrical Characteristics

STC

Optimum Operating Voltage (Vpm) :  16.8 V
Optimum Operating Current(Ipm) :    6.20 A
Open – Circuit Voltage (Voc) :    21.2 V
Short – Circuit Current (Isc) :    6.70 A
Maximum Power at STC (Pmax) :   100 W
Modul Efficiency :  14 %
Operating Module Temperature :   -40 °C to + 85°C
Maximum System Voltage :   1000 V DC
Maximum Series Fuse Rating :   20 A
Power Tolerance :   + 0 – 3 %

STC : Irradiance 1000 W/m², module temperature 25 °C, AM=1.5;

Power measurement tolerance : ±3 %

 

Mechanical Characteristics

Solar Cell :  Polycrystalline 124.8 x 156 mm
No. of Cells :  36 (4 X 9)
Dimensions :  1196 X 670 X 35 mm
Weight :  10 Kg
Front Glass :  3.2 mm (0.13 inches) tempered glass
Frame :  Anodized alumunium alloy
Junction Box  : IP65
Output Cables : TUV (2Pfg1169:2007), UL 4703, UL 44 4 mm² (0.00375 inches²)
Connectors  :  RADOX SOLAR intergrated twist locking connectors

 

Temperature Characteristics

Nominal Operating Cell Temperature (NOCT) : 45 ± 2 °C
Temperature Coefficient of Power  : -0.44 %/°C
Temperature Coefficient of Voc : -0.32 %/°C
Temperature Coefficient of Isc : 0.055 %/°C

 

Current-Voltage & Power-Voltage Curve

100P grafik  Len 100 Wp 100P grafik